Help
Description
[lavafed 2019.06.0097.gd4707dda2] rzn1d - health-check
Device-type
rzn1d
Submitter
Rémi Duraffort
Created
2 weeks ago
Priority
Medium
Visibility
Publicly visible
Required Tags
validation.linaro.org
#781
Incomplete
Device
lces2-01@validation.linaro.org
Started
2 weeks ago
Duration
10 minutes
Results
  

Job error: bootloader-commands timed out after 574 seconds

lava-dispatcher, installed at version: 2019.06.0097.gd4707dda2+stretch start: 0 validate Start time: 2019-07-06 09:16:52.663524+00:00 (UTC) Validating that http://images.validation.linaro.org/snapshots.linaro.org/openembedded/schneider/linaro-sumo/rzn1d/38/dip/fitImage-1.0-r0-rzn1-snarc.itb exists validate duration: 0.10 case: validate
case_id: 16371
definition: lava
result: pass
start: 1 tftp-deploy (timeout 00:05:00) [common] start: 1.1 download-retry (timeout 00:05:00) [common] start: 1.1.1 http-download (timeout 00:05:00) [common] downloading http://images.validation.linaro.org/snapshots.linaro.org/openembedded/schneider/linaro-sumo/rzn1d/38/dip/fitImage-1.0-r0-rzn1-snarc.itb saving as /var/lib/lava/dispatcher/tmp/lavafed-781/tftp-deploy-bdyhbddt/kernel/fitImage-1.0-r0-rzn1-snarc.itb total size: 22848300 (21MB) No compression specified progress 0% (0MB) progress 5% (1MB) progress 10% (2MB) progress 15% (3MB) progress 20% (4MB) progress 25% (5MB) progress 30% (6MB) progress 35% (7MB) progress 40% (8MB) progress 45% (9MB) progress 50% (10MB) progress 55% (12MB) progress 60% (13MB) progress 65% (14MB) progress 70% (15MB) progress 75% (16MB) progress 80% (17MB) progress 85% (18MB) progress 90% (19MB) progress 95% (20MB) progress 100% (21MB) 21MB downloaded in 0.21s (102.56MB/s) end: 1.1.1 http-download (duration 00:00:00) [common] case: http-download
case_id: 16372
definition: lava
duration: 0.21
extra: ...
level: 1.1.1
namespace: common
result: pass
end: 1.1 download-retry (duration 00:00:00) [common] start: 1.2 prepare-tftp-overlay (timeout 00:05:00) [common] start: 1.2.1 extract-nfsrootfs (timeout 00:05:00) [common] end: 1.2.1 extract-nfsrootfs (duration 00:00:00) [common] start: 1.2.2 lava-overlay (timeout 00:05:00) [common] [common] Preparing overlay tarball in /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r makedir: /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin makedir: /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/tests makedir: /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/results Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-add-keys Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-add-sources Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-background-process-start Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-background-process-stop Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-common-functions Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-echo-ipv4 Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-install-packages Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-installed-packages Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-os-build Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-probe-channel Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-probe-ip Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-target-ip Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-target-mac Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-target-storage Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-test-case Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-test-event Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-test-feedback Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-test-raise Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-test-reference Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-test-runner Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-test-set Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/bin/lava-test-shell Creating /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/environment start: 1.2.2.1 ssh-authorize (timeout 00:05:00) [common] end: 1.2.2.1 ssh-authorize (duration 00:00:00) [common] start: 1.2.2.2 lava-vland-overlay (timeout 00:05:00) [common] skipped lava-vland-overlay end: 1.2.2.2 lava-vland-overlay (duration 00:00:00) [common] start: 1.2.2.3 lava-multinode-overlay (timeout 00:05:00) [common] skipped lava-multinode-overlay end: 1.2.2.3 lava-multinode-overlay (duration 00:00:00) [common] start: 1.2.2.4 test-definition (timeout 00:05:00) [common] Loading test definitions start: 1.2.2.4.1 git-repo-action (timeout 00:05:00) [common] Using /lava-781 at stage 0 Fetching tests from http://git.linaro.org/lava-team/lava-functional-tests.git Running '/usr/bin/git clone http://git.linaro.org/lava-team/lava-functional-tests.git /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/0/tests/0_smoke-tests --depth=1' Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/0/tests/0_smoke-tests/lava-test-shell/smoke-tests-basic.yaml uuid=781_1.2.2.4.1 testdef=None end: 1.2.2.4.1 git-repo-action (duration 00:00:00) [common] case: git-repo-action
case_id: 16373
definition: lava
duration: 0.22
extra: ...
level: 1.2.2.4.1
namespace: common
result: pass
start: 1.2.2.4.2 test-overlay (timeout 00:05:00) [common] end: 1.2.2.4.2 test-overlay (duration 00:00:00) [common] case: test-overlay
case_id: 16374
definition: lava
duration: 0.01
extra: ...
level: 1.2.2.4.2
namespace: common
result: pass
start: 1.2.2.4.3 test-install-overlay (timeout 00:05:00) [common] end: 1.2.2.4.3 test-install-overlay (duration 00:00:00) [common] case: test-install-overlay
case_id: 16375
definition: lava
duration: 0.05
extra: ...
level: 1.2.2.4.3
namespace: common
result: pass
start: 1.2.2.4.4 test-runscript-overlay (timeout 00:04:59) [common] runner path: /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/0/tests/0_smoke-tests test_uuid 781_1.2.2.4.1 end: 1.2.2.4.4 test-runscript-overlay (duration 00:00:00) [common] case: test-runscript-overlay
case_id: 16376
definition: lava
duration: 0.06
extra: ...
level: 1.2.2.4.4
namespace: common
result: pass
Creating lava-test-runner.conf files Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/lavafed-781/lava-overlay-jxj_493r/lava-781/0 for stage 0 - 0_smoke-tests end: 1.2.2.4 test-definition (duration 00:00:00) [common] start: 1.2.2.5 compress-overlay (timeout 00:04:59) [common] end: 1.2.2.5 compress-overlay (duration 00:00:00) [common] start: 1.2.2.6 persistent-nfs-overlay (timeout 00:04:59) [common] end: 1.2.2.6 persistent-nfs-overlay (duration 00:00:00) [common] end: 1.2.2 lava-overlay (duration 00:00:00) [common] start: 1.2.3 extract-overlay-ramdisk (timeout 00:04:59) [common] end: 1.2.3 extract-overlay-ramdisk (duration 00:00:00) [common] start: 1.2.4 extract-modules (timeout 00:04:59) [common] end: 1.2.4 extract-modules (duration 00:00:00) [common] start: 1.2.5 apply-overlay-tftp (timeout 00:04:59) [common] [common] No overlay directory {'timeout': {'minutes': 5}, 'to': 'tftp', 'namespace': 'common', 'deployment_data': {}, 'kernel': {'type': 'uimage', 'url': 'http://images.validation.linaro.org/snapshots.linaro.org/openembedded/schneider/linaro-sumo/rzn1d/38/dip/fitImage-1.0-r0-rzn1-snarc.itb'}} end: 1.2.5 apply-overlay-tftp (duration 00:00:00) [common] start: 1.2.6 prepare-kernel (timeout 00:04:59) [common] start: 1.2.6.1 uboot-prepare-kernel (timeout 00:04:59) [common] end: 1.2.6.1 uboot-prepare-kernel (duration 00:00:00) [common] end: 1.2.6 prepare-kernel (duration 00:00:00) [common] start: 1.2.7 configure-preseed-file (timeout 00:04:59) [common] end: 1.2.7 configure-preseed-file (duration 00:00:00) [common] start: 1.2.8 compress-ramdisk (timeout 00:04:59) [common] end: 1.2.8 compress-ramdisk (duration 00:00:00) [common] end: 1.2 prepare-tftp-overlay (duration 00:00:00) [common] start: 1.3 lxc-create-udev-rule-action (timeout 00:04:59) [common] No LXC device requested end: 1.3 lxc-create-udev-rule-action (duration 00:00:00) [common] start: 1.4 deploy-device-env (timeout 00:04:59) [common] end: 1.4 deploy-device-env (duration 00:00:00) [common] Checking files for TFTP limit of 4294967296 bytes. end: 1 tftp-deploy (duration 00:00:01) [common] start: 2 uboot-action (timeout 00:09:59) [common] start: 2.1 uboot-from-media (timeout 00:09:59) [common] end: 2.1 uboot-from-media (duration 00:00:00) [common] start: 2.2 bootloader-overlay (timeout 00:09:59) [common] {'uimage': {'dtb': '0x80f00000', 'kernel': '0x84000000', 'ramdisk': '-'}, 'pass': None, 'zimage': {'dtb': '0x80f00000', 'kernel': '0x84000000', 'ramdisk': '-'}, 'bootm': {'dtb': '0x80f00000', 'kernel': '0x84000000', 'ramdisk': '-'}, 'bootz': {'dtb': '0x80f00000', 'kernel': '0x84000000', 'ramdisk': '-'}} Parsed boot commands: setenv autoload no; dhcp; setenv serverip 10.2.1.1; tftp 0x84000000 lavafed-781/tftp-deploy-bdyhbddt/kernel/fitImage-1.0-r0-rzn1-snarc.itb; setenv bootargs 'console=ttyS0,115200n8 rootfstype=ramfs rootwait coherent_pool=2M'; bootm 0x84000000#conf@1 end: 2.2 bootloader-overlay (duration 00:00:00) [common] case: bootloader-overlay
case_id: 16377
definition: lava
duration: 0.00
extra: ...
level: 2.2
namespace: common
result: pass
start: 2.3 connect-device (timeout 00:09:59) [common] [common] connect-device Connecting to device using 'telnet dispatcher01 7006' end: 2.3 connect-device (duration 00:00:00) [common] start: 2.4 uboot-retry (timeout 00:09:59) [common] start: 2.4.1 reset-device (timeout 00:09:59) [common] start: 2.4.1.1 pdu-reboot (timeout 00:09:59) [common] Calling: 'nice' '/usr/local/lab-scripts/snmp_pdu_control' '--hostname' 'pdu01' '--command' 'reboot' '--port' '14' '--delay' '20' >> pdu01 port 14 now powered off >> pdu01 port 14 now powered on >> pdu01 port 14 now power cycled Returned 0 in 22 seconds end: 2.4.1.1 pdu-reboot (duration 00:00:23) [common] case: pdu-reboot
case_id: 16378
definition: lava
duration: 22.95
extra: ...
level: 2.4.1.1
namespace: common
result: pass
end: 2.4.1 reset-device (duration 00:00:23) [common] start: 2.4.2 bootloader-interrupt (timeout 00:09:36) [common] Not interrupting bootloader, waiting for bootloader prompt bootloader-interrupt: Wait for prompt => (timeout 00:10:00) Trying 10.2.1.1... Connected to dispatcher01.lavalab. Escape character is '^]'. Scheider LCES2 7006 [115200 N81] ** BOOTLOADER STAGE0 for RZN1 ** Boot ROM Version 02.00 Boot source: QSPI 00 BOOTLOADER STAGE0 Success *** Bootloader stage0 END *** *** Execute 2nd Stage Bootloader which has been loaded and verified *** [32;1mFirst Stage Boot Loader (from GNU Build)[0m FSBL version DIP-secureboot-v1.7.1-14-gfd75da4 (ralphs@maple, Mon Jun 17 14:50:25 EDT 2019) Prepare Secure/Unsecure world Unsecure Boot (authentication disabled) Unsecure configuration (debug enabled) FIP table of contents: tos-fw@0x40000 size 0x80000 tb-fw-config@0xc0000 size 0x40000 hw-config@0x100000 size 0x40000 cm3-fw@0x140000 size 0x100000 nt-fw@0x240000 size 0x80000 nt-fw@0x2c0000 size 0x80000 Initialize DDR Controller Initialize QSPI Controller Probed QSPI Jedec code : 1 20 18 Enabling crypto engine... Copy Master from QSPI ok Copying firmware partition from 0x1004010c to 0x87c00000 Copying firmware partition from 0x102400f8 to 0x87800000 Valid non-trusted firmware @0x10240000: revision: 20190614 entry: 0x87800000 + 0 data: 0x102400f8 + 454472 cms: 0x102af0a0 + 1134 Booting Secure OS from 87c00000 D/TC:0 add_phys_mem:526 VCORE_UNPG_RX_PA type TEE_RAM_RX 0x87c00000 size 0x0006a000 D/TC:0 add_phys_mem:526 VCORE_UNPG_RW_PA type TEE_RAM_RW 0x87c6a000 size 0x00096000 D/TC:0 add_phys_mem:526 TA_RAM_START type TA_RAM 0x87d00000 size 0x00300000 D/TC:0 add_phys_mem:526 TEE_SHMEM_START type NSEC_SHM 0x87a00000 size 0x00200000 D/TC:0 add_phys_mem:526 CONSOLE_UART_BASE type IO_NSEC 0x40000000 size 0x00200000 D/TC:0 add_phys_mem:526 SYSCTRL_BASE type IO_SEC 0x40000000 size 0x00200000 D/TC:0 add_phys_mem:526 GIC_BASE type IO_SEC 0x44100000 size 0x00100000 D/TC:0 verify_special_mem_areas:464 No NSEC DDR memory area defined D/TC:0 add_va_space:565 type RES_VASPACE size 0x00a00000 D/TC:0 add_va_space:565 type SHM_VASPACE size 0x02000000 D/TC:0 dump_mmap_table:698 type IO_SEC va 0x84800000..0x849fffff pa 0x40000000..0x401fffff size 0x00200000 (pgdir) D/TC:0 dump_mmap_table:698 type IO_NSEC va 0x84a00000..0x84bfffff pa 0x40000000..0x401fffff size 0x00200000 (pgdir) D/TC:0 dump_mmap_table:698 type NSEC_SHM va 0x84c00000..0x84dfffff pa 0x87a00000..0x87bfffff size 0x00200000 (pgdir) D/TC:0 dump_mmap_table:698 type TA_RAM va 0x84e00000..0x850fffff pa 0x87d00000..0x87ffffff size 0x00300000 (pgdir) D/TC:0 dump_mmap_table:698 type RES_VASPACE va 0x85100000..0x85afffff pa 0x00000000..0x009fffff size 0x00a00000 (pgdir) D/TC:0 dump_mmap_table:698 type IO_SEC va 0x85b00000..0x85bfffff pa 0x44100000..0x441fffff size 0x00100000 (pgdir) D/TC:0 dump_mmap_table:698 type SHM_VASPACE va 0x85c00000..0x87bfffff pa 0x00000000..0x01ffffff size 0x02000000 (pgdir) D/TC:0 dump_mmap_table:698 type TEE_RAM_RX va 0x87c00000..0x87c69fff pa 0x87c00000..0x87c69fff size 0x0006a000 (smallpg) D/TC:0 dump_mmap_table:698 type TEE_RAM_RW va 0x87c6a000..0x87cfffff pa 0x87c6a000..0x87cfffff size 0x00096000 (smallpg) D/TC:0 core_mmu_alloc_l2:238 L2 table used: 1/4 I/TC: D/TC:0 init_canaries:164 #Stack canaries for stack_tmp[0] with top at 0x87c96778 D/TC:0 init_canaries:164 watch *0x87c9677c D/TC:0 init_canaries:164 #Stack canaries for stack_tmp[1] with top at 0x87c96e78 D/TC:0 init_canaries:164 watch *0x87c96e7c D/TC:0 init_canaries:165 #Stack canaries for stack_abt[0] with top at 0x87c97688 D/TC:0 init_canaries:165 watch *0x87c9768c D/TC:0 init_canaries:165 #Stack canaries for stack_abt[1] with top at 0x87c97e98 D/TC:0 init_canaries:165 watch *0x87c97e9c D/TC:0 init_canaries:167 #Stack canaries for stack_thread[0] with top at 0x87c99ea8 D/TC:0 init_canaries:167 watch *0x87c99eac I/TC: OP-TEE version: 3.2.0-9-g70266083-dev #1 Mon Jun 17 18:41:20 UTC 2019 arm D/TC:0 tee_ta_register_ta_store:534 Registering TA store: 'REE' (priority 10) D/TC:0 tee_ta_register_ta_store:534 Registering TA store: 'Secure Storage TA' (priority 9) D/TC:0 mobj_mapped_shm_init:559 Shared memory address range: 85c00000, 87c00000 I/TC: Initialized D/TC:0 init_primary_helper:917 Primary CPU switching to normal world boot U-Boot 2017.01 (Jun 14 2019 - 20:41:25 +0000) Model: RZ/N1D SNARC boards DRAM: 256 MiB NAND: 512 MiB MMC: sdhci@40100000: 0 SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB, mapped at 10000000 In: serial@40060000 Out: serial@40060000 Err: serial@40060000 Net: dwmac.44002000 end: 2.4.2 bootloader-interrupt (duration 00:00:02) [common] start: 2.4.3 bootloader-commands (timeout 00:09:34) [common] setenv autoload no => setenv autoload no bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.'] (timeout 00:09:34) setenv autoload no dhcp => dhcp bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.'] (timeout 00:09:34) dhcp dwmac.44002000 Waiting for PHY auto negotiation to complete..... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 setenv serverip 10.2.1.1 => setenv serverip 10.2.1.1 bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.'] (timeout 00:09:30) setenv serverip 10.2.1.1 tftp 0x84000000 lavafed-781/tftp-deploy-bdyhbddt/kernel/fitImage-1.0-r0-rzn1-snarc.itb => tftp 0x84000000 lavafed-781/tftp-deploy-bdyhbddt/kernel/fitImage-1.0-r0-rzn1-snarc.itb bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.'] (timeout 00:09:30) tftp 0x84000000 lavafed-781/tftp-deploy-bdyhbddt/kernel/fitImage-1.0-r0-rzn1-snarc.itb *** ERROR: `ipaddr' not set setenv bootargs 'console=ttyS0,115200n8 rootfstype=ramfs rootwait coherent_pool=2M' => setenv bootargs 'console=ttyS0,115200n8 rootfstype=ramfs rootwait coherent_pool=2M' bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.'] (timeout 00:09:30) setenv bootargs 'console=ttyS0,115200n8 rootfstype=ramfs rootwait coherent_pool=2M' bootm 0x84000000#conf@1 => bootm 0x84000000#conf@1 bootloader-commands: Wait for prompt Starting kernel (timeout 00:09:30) bootm 0x84000000#conf@1 Wrong Image Format for bootm command ERROR: can't get kernel image! bootloader-commands timed out after 574 seconds end: 2.4.3 bootloader-commands (duration 00:09:34) [common] case: bootloader-commands
case_id: 16379
definition: lava
duration: 574.00
extra: ...
level: 2.4.3
namespace: common
result: fail
uboot-retry failed: 1 of 1 attempts. 'bootloader-commands timed out after 574 seconds' bootloader-commands timed out after 574 seconds end: 2.4 uboot-retry (duration 00:00:00) [common] case: uboot-retry
case_id: 16380
definition: lava
duration: 0.00
extra: ...
level: 2.4
namespace: common
result: fail
uboot-action failed: 1 of 1 attempts. 'bootloader-commands timed out after 574 seconds' bootloader-commands timed out after 574 seconds end: 2 uboot-action (duration 00:00:00) [common] case: uboot-action
case_id: 16381
definition: lava
duration: 0.00
extra: ...
level: 2
namespace: common
result: fail
Cleaning after the job Cleaning up download directory: /var/lib/lava/dispatcher/tmp/lavafed-781/tftp-deploy-bdyhbddt/kernel start: 4.1 power-off (timeout 00:00:10) [common] Calling: 'nice' '/usr/local/lab-scripts/snmp_pdu_control' '--hostname' 'pdu01' '--command' 'off' '--port' '14' >> pdu01 port 14 now powered off Returned 0 in 1 seconds end: 4.1 power-off (duration 00:00:02) [common] case: power-off
case_id: 16382
definition: lava
duration: 1.53
extra: ...
level: 4.1
namespace: common
result: pass
start: 4.2 read-feedback (timeout 00:00:28) [common] No connection for namespace common end: 4.2 read-feedback (duration 00:00:00) [common] Override tmp directory removed at /var/lib/lava/dispatcher/tmp/lavafed-781 Root tmp directory removed at /var/lib/lava/dispatcher/tmp/lavafed-781 JobError: Your job cannot terminate cleanly. case: job
case_id: 16383
definition: lava
error_msg: bootloader-commands timed out after 574 seconds
error_type: Job
result: fail

Top of page

Please read the triage guidelines for help on debugging failures in the test job, test definitions or in individual test cases.

Job Description YAML

Pipeline jobs use the job definition to generate a descriptive YAML file when the pipeline is validated. The file represents the data sent to the dispatcher at the start of the job, including details of the device as well as the job parameters and the details of the parameters sent to each of the deploy, boot and test actions in the job pipeline.

Click on the Metadata, Device or Job Actions headings below to see some of the information from the description file for this job or download the complete file as YAML using the link above.

job.url
https://federation.lavasoftware.org/lava/scheduler/job/{id}
features.1.type
device
features.0.action
deploy
features.2.description
Test definition from git
device.name
lces2-01
lab.name
validation.linaro.org
job.type
test
job.name
rzn1d - health-check
features.0.name
deploy.tftp
features.2.type
device
slave.version
2019.06.0097.gd4707dda2
features.0.description
Deploy to tftp
slave.arch
amd64
features.1.action
boot
features.0.type
device
features.2.action
test
features.1.description
Boot from u-boot with a fit image
features.2.name
test.definition.git
device.type
rzn1d
features.1.name
boot.u-boot.fit
device type
hostname
timeouts
  • actions: {'minutes': 20}{'minutes': 3}{'minutes': 2}{'minutes': 3}{'minutes': 3}{'minutes': 3}{'seconds': 30}{'minutes': 10}{'seconds': 10}{'minutes': 5}{'minutes': 3}{'minutes': 10}{'minutes': 3}{'minutes': 2}{'seconds': 30}{'minutes': 2}{'minutes': 2}{'minutes': 5}{'seconds': 45} flash-uboot-umsbootloader-commandsauto-login-actionlava-test-shelluboot-actionbootloader-actionu-boot-interruptnfs-deploypower-offdownload-retrybootloader-retrydd-imageuboot-retryboot-qemu-imagebootloader-interruptboot-image-retryapply-overlay-imagehttp-downloadumount-retry
  • connections: {'seconds': 30}{'seconds': 30}{'minutes': 10}{'minutes': 2}{'seconds': 30}{'seconds': 10}{'seconds': 30} bootloader-interruptu-boot-interruptdd-imageauto-login-actionbootloader-commandslava-test-shelluboot-retry
device action methods
deploy:
  • image:
  • ssh:
  • overlay:
  • tftp:
  • nbd:
  • lxc:
  • usb:
boot:
  • dfu:
    • enter-commands: ['dfu']
    • command: dfu-util
  • ssh:
  • minimal:
  • u-boot:
    • needs_interrupt: False
    • interrupt_char:
    • mkimage_arch: arm
    • interrupt_prompt: Hit any key to stop autoboot
    • bootloader_prompt: =>
target
...
timeouts
  • job: {'seconds': 600}

  1. Timeout
    • 5 minutes
    to
    tftp
    namespace
    common
    deployment_data
    {}
    kernel
    {'type': 'uimage', 'url': 'http://images.validation.linaro.org/snapshots.linaro.org/openembedded/schneider/linaro-sumo/rzn1d/38/dip/fitImage-1.0-r0-rzn1-snarc.itb'}

  1. prompts
    ['Current password: ', 'New password: ', 'Retype new password: ', 'root@rzn1-snarc:']
    Timeout
    • 10 minutes
    commands
    fit
    namespace
    common
    transfer_overlay
    {'unpack_command': 'tar -C / -xzf', 'download_command': 'unset http_proxy ; dhclient eth1 ; cd /tmp ; wget'}
    method
    u-boot
    auto_login
    {'login_prompt': 'login:', 'username': 'root', 'password': 'P@ssword-1', 'password_prompt': 'Password:', 'login_commands': ['P@ssword-1', 'azertAZERT12345', 'azertAZERT12345', 'azertAZERT12345']}

  1. Timeout
    • 5 minutes
    Definitions
    • name smoke-tests
    • path lava-test-shell/smoke-tests-basic.yaml
    • repository http://git.linaro.org/lava-team/lava-functional-tests.git
    • from git
    namespace
    common
    stage
    0

Job Timings

This section helps test writers to check for actions with a duration which is much shorter than the requested timeout. Reducing these timeouts will allow failures to be identified more quickly.

The graph only shows actions that are longer than 1 second. The full list is anyway available in the table.

Loading the data...